SPEC:
1084 STEEL
knife 1: CAST CTEK w/ orange g10 liners
knife 2: cocobolo
Both knives have 304 stainless corby bolts and micarta lanyard tubes with West Systems G Flex epoxy.
The tangs are tapered. Thumb ramp is chamfered and the spine is left w/ sharp corners.
Bevels are ground flat and then convexed to nearly zero thickness behind the edge.
Tips transition to much thicker behind the edge for added strength.
Steel is on the heavy side of 1/8" thick. 8-1/2" long by 1-1/4" wide with approx. 4" blade.
Cast Ctek is $210.
Cocobolo is $200.
Prices include shipping CONUS.
Add $40 and allow an extra week for kydex sheath.
I take all forms of payment.
Please let me know if you have any questions.
Imgur seems to be down. You can view the pics on my website. Sorry for the inconvenience.
https://timothyjohnsonknives.com/currently-available/1084-bushcrafter
AVAILABLE BUSHCRAFTERS
Moderator: timos
-
- Posts: 1456
- Joined: Wed Jan 25, 2017 3:01 pm
- Location: oxford, MA
- Has thanked: 113 times
- Been thanked: 143 times
- Contact:
AVAILABLE BUSHCRAFTERS
Tim Johnson
Oxford, MA
“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--s. suzuki
Web: http://www.timothyjohnsonknives.com
Email: tim@blackstoneknife.com
Instagram: @timostheos
Oxford, MA
“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--s. suzuki
Web: http://www.timothyjohnsonknives.com
Email: tim@blackstoneknife.com
Instagram: @timostheos