I made this for my kitchen. It’s maple, stained and sealed with tung oil. The magnets are 5/8” dia. x 1/4” thick disk neodymium magnets in a single continuous line, located 1/8” below the surface.
Magnetic knife strip
-
- Posts: 268
- Joined: Tue Sep 22, 2020 1:36 pm
- Has thanked: 127 times
- Been thanked: 155 times
- XexoX
- Posts: 2238
- Joined: Sat Aug 01, 2020 5:02 pm
- Location: Salem Oregon USA
- Has thanked: 3047 times
- Been thanked: 1049 times
Re: Magnetic knife strip
Fantabulous! A real winner. How long is it, if you don't mind me asking? Are the magnets centered in the board?JASinIL2006 wrote: ↑Tue Mar 16, 2021 8:03 pm I made this for my kitchen. It’s maple, stained and sealed with tung oil. The magnets are 5/8” dia. x 1/4” thick disk neodymium magnets in a single continuous line, located 1/8” below the surface.
You can blame Mr. Suburban for my being here.
The thing about quotes on the internet is you can not confirm their validity. -- Abraham Lincoln
All steels are equal if you can't keep them sharp. -- Jeff B.
The thing about quotes on the internet is you can not confirm their validity. -- Abraham Lincoln
All steels are equal if you can't keep them sharp. -- Jeff B.
-
- Posts: 250
- Joined: Sun Mar 29, 2020 8:54 am
- Location: north Ontario CAN
- Has thanked: 142 times
- Been thanked: 152 times
Re: Magnetic knife strip
That's very nice! Unlike XexoX I'm not going to ask any personal questions. I think thats what PMs are for.
The pig is a magical animal. It takes vegetables and turns them into bacon.
- XexoX
- Posts: 2238
- Joined: Sat Aug 01, 2020 5:02 pm
- Location: Salem Oregon USA
- Has thanked: 3047 times
- Been thanked: 1049 times
Re: Magnetic knife strip
You can blame Mr. Suburban for my being here.
The thing about quotes on the internet is you can not confirm their validity. -- Abraham Lincoln
All steels are equal if you can't keep them sharp. -- Jeff B.
The thing about quotes on the internet is you can not confirm their validity. -- Abraham Lincoln
All steels are equal if you can't keep them sharp. -- Jeff B.
-
- Posts: 268
- Joined: Tue Sep 22, 2020 1:36 pm
- Has thanked: 127 times
- Been thanked: 155 times
Re: Magnetic knife strip
Thanks! It’s a full 24” long and the magnets run down the center. It’s about 1.5” thick to allow me to easily get my fingers behind the handles.It’s attached to the wall with a couple metal keyhole brackets that catch on screws in the wall.XexoX wrote: ↑Tue Mar 16, 2021 8:41 pmFantabulous! A real winner. How long is it, if you don't mind me asking? Are the magnets centered in the board?JASinIL2006 wrote: ↑Tue Mar 16, 2021 8:03 pm I made this for my kitchen. It’s maple, stained and sealed with tung oil. The magnets are 5/8” dia. x 1/4” thick disk neodymium magnets in a single continuous line, located 1/8” below the surface.