FS Damascus 250MM

Formerly Blackstone Knife Company

Moderator: timos

Post Reply
timos
Posts: 1312
Joined: Wed Jan 25, 2017 3:01 pm
Location: oxford, MA
Has thanked: 15 times
Been thanked: 35 times
Contact:

FS Damascus 250MM

Post by timos »

Specs:

Random Damascus Pattern with 15n20 and 26C3

Heat Treated @ RC63

9-7/8” (250mm) blade length

1-7/8” (47.6 mm) tall at heel

.14” (3.5mm) spine thickness with full distal taper

Bevels ground convex

15” (380mm) Overall length

7.2 Oz total weight. Balance point between makers mark and heel.

One Piece Brazilian Kingwood handle with Copper Ferrule

Chamfered choil

International Shipping may require additional fees for shipping.

$650 shipped CONUS. http://timothyjohnsonknives.com/current ... 77ctz0xqr8

Image
Tim Johnson
Oxford, MA

“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--shunryu suzuki
Image
http://www.timothyjohnsonknives.com
tim@blackstoneknife.com

Bensbites
Posts: 2318
Joined: Mon Jan 30, 2017 7:42 pm
Location: Massachusetts
Has thanked: 110 times
Been thanked: 55 times
Contact:

Re: FS Damascus 250MM

Post by Bensbites »

Stunning !!

Kalaeb
Posts: 2869
Joined: Thu Jan 26, 2017 8:59 pm
Location: Baltimore, MD
Has thanked: 50 times
Been thanked: 110 times

Re: FS Damascus 250MM

Post by Kalaeb »

Beautiful. Can you tell me more about the distal taper. What is thickness half way the 1 inch from tip?

timos
Posts: 1312
Joined: Wed Jan 25, 2017 3:01 pm
Location: oxford, MA
Has thanked: 15 times
Been thanked: 35 times
Contact:

Re: FS Damascus 250MM

Post by timos »

halfway down the spine is .10, an inch from tip is .03"

Image
Tim Johnson
Oxford, MA

“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--shunryu suzuki
Image
http://www.timothyjohnsonknives.com
tim@blackstoneknife.com

Kalaeb
Posts: 2869
Joined: Thu Jan 26, 2017 8:59 pm
Location: Baltimore, MD
Has thanked: 50 times
Been thanked: 110 times

Re: FS Damascus 250MM

Post by Kalaeb »

So sweet. Nice work.

Post Reply